Decal Primer
SKU:
2.42132E+12
£3.99
£3.99
Unavailable
per item
A water based clear acrylic/polyurathane coating designed to provide a seal and base for the application of decals (transfers) onto painted models, to help in the positioning and adhesion. Comes in a 100ml spray bottle, apply direct from the bottle and use sponge applicator to smooth out and remove any air bubbles/excess or use conventional brush or airbrush.
Make sure that all surfaces are clean and dry before application. Spray lightly over the area and make sure that the product is spread evenly using a brush or sponge or air only from airbrush. Build up the required finish with light even coats. Allow to dry thoroughly (24-48hrs) before applying Decals/further coat. We recommend at least 2 coats before applying decals. Allow decals to dry before applying a further sealing coat over the top to hold in place and protect. Or apply decals into the wet solution of the second coat for best adhesion.
This product will give a clear satin like sheen that can be built to a high gloss with repeated layers or can be over sprayed with a suitable matt varnish if a flat finish is required.
Clean utensils with water
Lable and bottle colours may vary.
Make sure that all surfaces are clean and dry before application. Spray lightly over the area and make sure that the product is spread evenly using a brush or sponge or air only from airbrush. Build up the required finish with light even coats. Allow to dry thoroughly (24-48hrs) before applying Decals/further coat. We recommend at least 2 coats before applying decals. Allow decals to dry before applying a further sealing coat over the top to hold in place and protect. Or apply decals into the wet solution of the second coat for best adhesion.
This product will give a clear satin like sheen that can be built to a high gloss with repeated layers or can be over sprayed with a suitable matt varnish if a flat finish is required.
Clean utensils with water
Lable and bottle colours may vary.
5 available